- Draw beer from the top of your keg instead of the bottom. The top is always where the clearest beer is!
- Super helpful when you have to move your keg before serving. Kicked up sediment will remain near the bottom
- Installs on any Ball Lock or Pin Lock keg quickly and easily
With the Torpedo Buoy™ floating dip tube, you'll be pouring the clearest beer possible from first pint to last! As your beer sits at low temperatures, more and more haze particles settle out to the bottom of the keg. This means the clearest beer in the keg is always at the top. The Buoy™ uses a stainless float to position the silicone dip tube just 1 inch below the surface of the beer.
Installs on any Ball Lock or Pin Lock keg quickly and easily. Simply remove your bev out post and replace the long metal dip tube with the provided 3" metal dip tube. Slide one end of the silicone tubing over the 3" dip tube and the other end of the tubing over the metal tube connected to the float. The silicone tubing is sized for 5-gallon kegs, but you can cut it shorter to use on 1.5 or 2.5-gallon kegs.
Specifications:
- 3" Stainless Dip Tube
- 1/4" ID Silicone Tubing (23.5" long)
- Ball Float Made from 304 Stainless Steel
Installation Note: The Torpedo Buoy™'s silicone dip tube is sized to fit all Torpedo Kegs and other 5-gallon or smaller corny kegs. Depending on the size and dimensions of your keg, you may need to shorten the silicone tube for better performance. When installed on your empty keg, you ideally want the Buoy™ to hang freely with just enough length for the end of the dip tube to touch the bottom of the keg.
